This BONEZONE magazine article details how the AM dual-laser platforms at Cretex Medical | rms enable greater efficiency and scale for customers.
November 11, 2026
Cretex Medical | rms featured in BONEZONE Magazine.
The orthopedic device market faces rapid changes. OEMs must navigate intense competition, rising development and labor costs, and expanding patient demand. Meeting these challenges requires contract manufacturing partners that actively reduce operational risk while controlling production expenses. Cretex Medical | rms has long served as a trusted leader in medical device additive manufacturing. By integrating advanced dual-laser platforms into our production fleet, we offer orthopedic companies an efficient path to scale complex devices faster.
Traditional Laser Powder Bed Fusion (L-PBF) relies on a single-fiber laser. In that setup, the laser traces and melts powdered metal sequentially across each layer. Dual laser platforms transform this process by deploying two synchronized lasers equipped with independent optical galvanometers. Both lasers scan and melt the build envelope simultaneously, significantly accelerating production cycles.
Managing thermal energy is critical when two lasers operate simultaneously. If beam paths cross too closely, localized heat buildup can cause keyholing, excessive spatter, and microstructural defects. Our systems use coordinated pathing strategies to eliminate thermal interference and maintain metallurgical integrity.
Dual laser systems dramatically shorten machine cycle times, especially when printing taller or high-mass parts. Shorter build times reduce operational exposure per run while allowing dense nesting of multiple devices on a single build plate. These savings
Cretex Medical | rms is able to pair dual-laser performance with unmatched fleet capacity. Our facility operates 34 single-laser and 5 dual-laser systems. This setup provides rare redundancy and burst capacity for high-volume programs. Regulatory risk
This platform also advances environmental sustainability. Auxiliary systems—including vacuum pumps, heaters, and chillers—run fewer hours per kilogram of melted metal. Furthermore, the recoating step takes a fixed amount of time per layer. Because dual lasers cut melting time, the equipment spends more time melting titanium and less time cycling mechanical coaters.
The dual-laser platform expands our capacity to support your devices from early clinical trials through high-volume commercial production. Our capital investment strategy is focused on customer scalability, risk mitigation, and cost containment. At Cretex Medical | rms, we provide the engineering expertise, equipment redundancy, and quality systems needed to secure your orthopedic supply chain.
You can read the full article in BONEZONE Magazine.
Please visit the Cretex Medical | rms’s Services Page for more information about our range of capabilities.